Compaq Presario V6000T

Please, discuss notebooks related issues here.

Postby p2501 » Wed Jan 24, 2007 11:22 pm

ok i put it on my laptop

but i think my laptop is to new for this prog

i get no fans speed read out

H/W diagnostics info:
Windows XP Professional Version 5.1.2600 Service Pack 2
Manufacturer: Hewlett-Packard
Board model: Presario V6000 (EY801AV#ABA)
Version: Rev 1
BIOS vendor: Hewlett-Packard
BIOS version: F.09 , Release date: 11/13/2006
Chipset: 27A08086
Vendor ID: 30BB103C
SouthBridge: 27B98086
SMB port used: 18E0
CPU ID:0-6-15-6
BrandName:Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
Internal Freq=1,995.0 MHz
External Freq=166.25 MHz
SystemBus Freq=665.0 MHz QDR
Thermo control configuration:
Full Throttle:100.0%
AMD Low Power mode:Disabled
Win 95/98 Idle Control:Disabled
Device:None Throttle:25.0% Enable at:158.0°F Disable at:156.2°F
Main Sensor: N/A
Monitored data values:
Mainboard=xx.x°C (0,N/A,0.0°F)
CPU1=xx.x°C (1,N/A,0.0°F)
CPU1 Core=75.2°F (1,CoreTemp,0.0°F)
CPU0 Core=77.0°F (0,CoreTemp,0.0°F)
CPU=xxxx rpm
CPU1=xxxx rpm
CPU2=xxxx rpm
Power=xxxx rpm
HDD1 temp=104.0°F FUJITSU MHV2080BH PL 892C
I thought what I'd do was, I'd pretend I was one of those deaf-mutes or shoud I ?
User avatar
Posts: 2
Joined: Sun Jan 21, 2007 8:40 pm
Location: JP

Postby author » Thu Jan 25, 2007 5:49 am

As you can see on the site, for notebooks I declare CPU temperature monitoring support ONLY, because absolute majority of notebooks in the market are capable to report just CPU temperature by hardware.

Neither voltages, nor fan speeds are supported BY HARDWARE.

Yes, almost all notebooks have fan CONTROL feature, but it does not mean fan SPEED reading at all, CPU temperature is used to control fan supply voltage, and it is implemented entirely in HARDWARE.
The Hmonitor's author
Site Admin
Posts: 116
Joined: Sun Feb 12, 2006 11:01 am

Return to Notebooks support

Who is online

Users browsing this forum: No registered users and 1 guest