Intel SE7230NHQ MB -- checking on correct settings

To report bugs and incompatibility issues.

Intel SE7230NHQ MB -- checking on correct settings

Postby mkc451 » Wed Oct 11, 2006 4:13 pm

I am trying to make sure I am monitoring the correct temp & fan settings on my Intel Server motherboard. The fan readings show 2 cpu fans, only one cpu though and speeds don't change even though I can hear the fan speed up. Am I missing something in the config? The supported Motherboard list shows Intel SE7230 boards supported but not this exact one.. :?:
The system in running 4 SATA drives mirrored with a fan blowing across them in a Thermaltake Tsunami Dream case.

Temps also don't jive with what I see in the bios hw monitor. The report is below:

Hmonitor Version Pro
Manufacturer: Intel Corporation
Board model: SE7230NH1
Main Sensor: EMC6D10x
Monitored data values:
Mainboard=30.0°C (0,N/A,0.0°C)
CPU1=46.0°C (1,N/A,0.0°C)
Power=40.0°C (0,N/A,0.0°C)
Chassis=1064 rpm
CPU1=633 rpm
CPU2=622 rpm
Posts: 1
Joined: Mon Oct 09, 2006 6:25 pm

Postby author » Fri Oct 13, 2006 1:51 pm

We have done some tests together with the author of this post, and identified correct sensors assignment for Intel SE7230NHQ board:

1st temp - System/Mainboard;
2nd temp - CPU;
3rd temp - Chipset/Northbridge;
1st fan - CPU;
others - chassis or so.
The Hmonitor's author
Site Admin
Posts: 116
Joined: Sun Feb 12, 2006 11:01 am

Return to Technical support

Who is online

Users browsing this forum: No registered users and 1 guest