Support for Intel Board D945GCNL

To report bugs and incompatibility issues.

Support for Intel Board D945GCNL

Postby mlgartman » Fri Oct 17, 2008 7:11 pm

Does not appear to see any of the motherboard sensors, I would note that this board is listed as supported and suggests it uses the EMC6D10X sensor chip. This board is brand new and comes with an SMSC SCH5127-NW Super I/O Multifunction chip that has sensor functions.

My Bios shows:

Processor Fan Speed
Front Fan Speed
Rear Fan Speed

Processor Temp
Internal Temp
Remote Temp

V 12.0
V 5.0
V 3.3
V 1.5

Under Hardware Monitor Menu, The values are real time and change if you leave the Bios open. hMonitor does find my HDD and GPU with no problem. I would also note that this board is not supported by Intel Desktop Utilities. None of the monitoring programs seem to work.

I like this program better than any I have tried, and hope it can work with my setup. Please advise.
Posts: 2
Joined: Fri Oct 17, 2008 6:44 pm

Re: Support for Intel Board D945GCNL

Postby author » Sat Oct 18, 2008 5:48 am

Thank you.
I need some additional details about your board.
Test program is sent to your E-mail address.
The Hmonitor's author
Site Admin
Posts: 116
Joined: Sun Feb 12, 2006 11:01 am

Re: Support for Intel Board D945GCNL

Postby mlgartman » Wed Oct 22, 2008 8:57 pm

All Problems Resolved.

I checked all monitoring programs I could find, Intel Desktop Util, Speedfan, Everest and others, all of which said they supported my motherboard. None worked. Alan responded quickly and with much back and forth, resolved the problem. This required a new Beta version of Hmonitor. Has found all available sensors for my setup.
Alan is very professional, Best product of its type!!! :D

Hmonitor Version Pro (Beta) 1407D1C3
Mark Gartman (BetaTester)
H/W diagnostics info:
Windows XP Professional Version 5.1.2600 Service Pack 3
Manufacturer: Intel Corporation
Board model: D945GCNL
Version: AAD97184-106
BIOS vendor: Intel Corp.
BIOS version: NL94510J.86A.0025.2008.0107.1543, Release date: 01/07/2008
Chipset: Intel 945G/GC/GZ
Vendor ID: D6068086
SouthBridge: 27B88086
SMB port used: 2000
CPU:Intel(R) Pentium(R) D CPU 2.66GHz
Internal Freq=2660.0 MHz
External Freq=133.00 MHz
SystemBus Freq=532.0 MHz QDR
Thermo control configuration:
Full Throttle:100.0%
AMD Low Power mode:Disabled
Win 95/98 Idle Control:Disabled
Device:None Throttle:25.0% Enable at:70.0°C Disable at:65.0°C
Main Sensor: SCH5127
Monitored data values:
Mainboard=38.0°C (0,Auto,0.0°C)
CPU=45.0°C (1,Auto,0.0°C)
Chassis=38.0°C (0,Auto,0.0°C)
N/A=xx.x°C (0,Auto,0.0°C)
CPU=2270 rpm
Chassis=786 rpm
Mainboard=1120 rpm
N/A=xxxx rpm
HDD1 temp=39.0°C MAXTOR STM3160812A 3.AAK
VGA device: NVIDIA GeForce 8400 GS
VGA Device ID: 042210DE,052310DE.A1
VGA driver: NVIDIA Compatible Windows 2000 Display driver, Version 169.06
VGA sensor: GeForce
VGA GPU=48.0°C
VGA Ambient=xx.x°C
VGA Fan=xxxx rpm (xx%)
VGA Core=+x.xxV
VGA Bus=+x.xxV
Posts: 2
Joined: Fri Oct 17, 2008 6:44 pm

Return to Technical support

Who is online

Users browsing this forum: No registered users and 1 guest