Asus M2A-VM supported!

To report bugs and incompatibility issues.

Asus M2A-VM supported!

Postby hsm » Fri Oct 26, 2007 1:41 pm

Hmonitor Version Pro
H/W diagnostics info:
Windows XP Professional Version 5.1.2600 Service Pack 2
Manufacturer: ASUSTeK Computer INC.
Board model: M2A-VM
Version: 1.XX
BIOS vendor: Phoenix Technologies, LTD
BIOS version: ASUS M2A-VM ACPI BIOS Revision 1301, Release date: 09/11/2007
Chipset: 79101002
Vendor ID: 826D1043
SouthBridge: 00000000
SMB port used: 0000
CPU ID:0-15-3-3
BrandName:AMD Athlon(tm) 64 X2 Dual Core Processor 5600+
Internal Freq=3.006,0 MHz
External Freq=601,20 MHz
SystemBus Freq=1202,4 MHz DDR
Thermo control configuration:
Full Throttle:100,0%
AMD Low Power mode:Disabled
Win 95/98 Idle Control:Disabled
Device:None Throttle:25,0% Enable at:70,0°C Disable at:65,0°C
Main Sensor: IT8718F
Monitored data values:
Mainboard=34,0°C (0,Thermistor,0,0°C)
CPU1=26,0°C (1,Diode,0,0°C)
Temp3=25,0°C (0,Thermistor,0,0°C)
CPU0 Core=33,0°C (0,AMDK8,0,0°C)
Chassis=3154 rpm
CPU1=xxxx rpm
CPU2=xxxx rpm
Power=xxxx rpm
HDD1 temp=38,0°C WDC WD3200JB-00KFA0 08.05J08

the CPU Temp is about 26°C - this can´t be true :-(
Posts: 1
Joined: Fri Oct 26, 2007 1:18 pm

Postby author » Fri Oct 26, 2007 1:56 pm

Look at CPU core - it is much more reliable... For 2nd sensor, try to change its type to Thermistor and watch the result. Also, it can display some OTHER component temperature - CPU1 is just DEFAULT TEXT LABEL, no more!
To disable it at all - set the caption to N/A.
Also, much probably, 1st fan is for CPU, not Chassis.
The Hmonitor's author
Site Admin
Posts: 116
Joined: Sun Feb 12, 2006 11:01 am

Postby author » Thu Nov 22, 2007 5:47 pm

Full support for this board (Asus M2A-VM) is added in the Hmonitor release.
The Hmonitor's author
Site Admin
Posts: 116
Joined: Sun Feb 12, 2006 11:01 am

Return to Technical support

Who is online

Users browsing this forum: No registered users and 1 guest