Is Gigabyte 945P-S3 supported?

To report bugs and incompatibility issues.

Is Gigabyte 945P-S3 supported?

Postby tayhksa » Thu Mar 29, 2007 8:36 pm

my Board model: Gigabyte 945P-S3

your software does not support with my pc...
when you will support it?
thenk you.

there is my report :

Hmonitor Version Pro
H/W diagnostics info:
Windows Vista Version 6.0.6000
Manufacturer: Gigabyte Technology Co., Ltd.
Board model: 945P-S3
BIOS vendor: Award Software International, Inc.
BIOS version: F2, Release date: 08/04/2006
Chipset: Intel 945P
Vendor ID: 50001458
SouthBridge: 27B88086
SMB port used: 0500
CPU ID:0-15-6-4
BrandName:Intel(R) Pentium(R) D CPU 3.40GHz
Internal Freq=3,416.0 MHz
External Freq=200.94 MHz
SystemBus Freq=803.8 MHz QDR
Thermo control configuration:
Full Throttle:100.0%
AMD Low Power mode:Disabled
Win 95/98 Idle Control:Disabled
Device:None Throttle:25.0% Enable at:70.0°C Disable at:69.0°C
Main Sensor: IT8712F
Monitored data values:
Mainboard=23.0°C (0,Diode,0.0°C)
CPU1=xx.x°C (1,Thermistor,0.0°C)
Temp3=1.0°C (0,Thermistor,0.0°C)
Temp4=xx.x°C (0,N/A,0.0°C)
Chassis=xxxx rpm
CPU1=xxxx rpm
CPU2=xxxx rpm
Power=xxxx rpm
Posts: 1
Joined: Fri Feb 09, 2007 12:00 pm

Postby author » Fri Mar 30, 2007 5:45 am

According to the report, your board is already supported!
You may only need to change probe type for CPU to DIODE.
The Hmonitor's author
Site Admin
Posts: 116
Joined: Sun Feb 12, 2006 11:01 am

Return to Technical support

Who is online

Users browsing this forum: No registered users and 1 guest